{"id":3516,"date":"2026-09-29T04:23:14","date_gmt":"2026-09-28T20:23:14","guid":{"rendered":"http:\/\/www.meovat9.com\/blog\/?p=3516"},"modified":"2026-09-29T04:23:14","modified_gmt":"2026-09-28T20:23:14","slug":"can-the-80g-radar-level-meter-be-used-in-a-beverage-production-tank-499b-232aff","status":"publish","type":"post","link":"http:\/\/www.meovat9.com\/blog\/2026\/09\/29\/can-the-80g-radar-level-meter-be-used-in-a-beverage-production-tank-499b-232aff\/","title":{"rendered":"Can the 80G Radar Level Meter be used in a beverage production tank?"},"content":{"rendered":"

Hey folks, let\u2019s cut to the chase: if you\u2019re a beverage production manager or someone spec\u2019ing level instruments for a new tank line, you\u2019ve probably stared at 80G radar level meters and wondered, \u201cCan this tech even handle my beverage tanks?\u201d I\u2019ve been selling 80G radars for over 7 years now, and let me tell you\u2014half the calls I get from beverage plant ops start with that exact question. Today, I\u2019m breaking this down like I would over a coffee in my warehouse, no stuffy whitepapers, no corporate jargon\u2014just real-world answers you can use. 80G Radar Level Meter<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get the basics straight: what even is an 80G radar, and why would beverage makers care about it? Unlike old-school radar units that ran on lower frequencies (like 26G or lower), 80G sends out super-short, tight microwave pulses at 80 gigahertz. Think of it like a laser, but it works even if there\u2019s a little steam or foam mucking things up. For beverage tanks, that\u2019s a game-changer\u2014you\u2019re dealing with all kinds of messy stuff: carbonation foam, condensation, varying liquid viscosities (from water to thick syrups to even nut milks these days), and those random built-in tank fixtures like agitators, heating coils, or dip pipes. Back in the day, people used ultrasonic for this stuff, but those die instantly in humid, steamy beverage rooms, or they get tricked by foam. And guided wave radar? Yeah, that works for some, but it can scratch syrupy liquids or get gunked up in tanks with high solids carryover (hello, fruit juice processing!). That\u2019s where 80G comes in.<\/p>\n

Now, let\u2019s get to the core question: can you actually use an 80G radar on a beverage production tank? The short answer is: almost always, but it depends on a few key details specific to your<\/em> tank and product. Let\u2019s walk through the non-negotiables I check with every client before I even say \u201cyes, this will work.\u201d<\/p>\n

First, the product itself. Beverages are a weird mix\u2014some are super pure (filtered water, soda base), others are foamy as hell (craft beer fermenters, sparkling wine), and some are thick enough to spread like honey (fruit purees, chocolate syrup for energy drinks). 80G radars love when the liquid has a decent dielectric constant (DC)\u2014that\u2019s just a fancy way of saying how well the microwave energy bounces off it. Water-based beverages have a DC around 60-80, which is perfect for 80G. Even syrupy drinks with a little less water (like 40 DC for high-concentrate apple juice) still work great. The only time I\u2019ll hesitate is if you\u2019re dealing with a super low-DC product, like cooking oil (DC ~2) or powdered ingredients, but 99% of beverage tanks are holding liquids that hit that sweet spot for 80G. Now, foam\u2014this is where 80G crushes the old tech. Let\u2019s talk about fermenting craft beer, for example: when yeast is doing its thing, you get that thick, bubbly krausen that can be 2-3 feet tall. Ultrasonic will bounce off the top of the foam and give you a totally wrong level reading. 26G radar might struggle if the foam is extra dense, because its pulses are broader and can get confused. But 80G? Those tight pulses slice right through most beer foam (unless it\u2019s like 4+ feet of super tight, sticky foam from a high-gravity brew\u2014even then, we can tweak the settings). I\u2019ve got three craft breweries as clients right now that swapped their old 26G radars for 80G and cut their level reading errors from 10% to less than 0.5%\u2014that\u2019s a huge win for not overfilling or underfilling batch runs.<\/p>\n

Next, the tank setup. This is where a lot of people mess up\u2014they buy an 80G radar without checking their tank\u2019s internals. Let\u2019s say you have a 10,000-gallon cold brew coffee tank with a paddle agitator spinning 24\/7, or a carbonated soda tank with a heating coil wrapped around the sides, or a wine tank with dip pipes for sample draws. Old radars will bounce off those agitators or pipes and give you false readings. But 80G\u2019s narrow beam angle (most are 3-5 degrees, compared to 8-10 degrees for 26G) means the pulse is only focused straight down the center of the tank. I once had a client with a 15-foot-tall tank that had a big agitator blade dead-center, and his old 26G radar kept picking up the blade every time it spun. We installed an 80G radar with a 3-degree beam, and boom\u2014no more false signals. The pulse just misses the agitator and hits the liquid. Now, what about tank pressure? A lot of beverage tanks are pressurized\u2014soda tanks, sparkling wine tanks, even some cold brew tanks that are sealed for freshness. 80G radars are sealed to IP67 or IP68 standards, so they handle pressure and moisture way better than ultrasonic, which will corrode or get water inside the transducer if there\u2019s any pressure buildup. I\u2019ve installed these on tanks up to 50 PSI, and they\u2019ve been running for 3 years straight without a hiccup.<\/p>\n

Wait, but what about the cleaning part? Beverage production is all about CIP\u2014Clean-in-Place\u2014right? You\u2019re spraying hot, caustic chemicals and water all over the tank to sanitize it between batches. That means the level meter has to hold up to high heat, harsh chemicals, and those CIP spray balls. Most 80G radars are rated for CIP: we use materials like PVDF or PTFE for the antenna (the part that sticks into the tank) that resist corrosion from things like sodium hydroxide (lye) or nitric acid, which are common in beverage CIP. And they can handle temperatures up to 150\u00b0C (300\u00b0F) for short CIP cycles, which is more than enough for most plants. I had a client who makes organic fruit purees\u2014their old ultrasonic meter would fail every 6 months because the CIP spray would wear down the plastic transducer. They switched to our 80G model 2 years ago, and it\u2019s still going strong.<\/p>\n

Now, let\u2019s talk about the myths I hear all the time. First myth: \u201c80G is too expensive for beverage tanks.\u201d Yeah, upfront it might cost a little more than an ultrasonic, but let\u2019s do the math: if you have a level meter that\u2019s wrong 10% of the time, you might be overproducing 500 gallons of soda a month (wasting ingredients and money) or underfilling batches (leading to product recalls or lost revenue). We\u2019ve got clients where the 80G radar paid for itself in 3 months because they cut waste from bad level readings. Second myth: \u201cFoam will mess up 80G too.\u201d Like I said earlier, 80G is way better, but if you have super thick, dense foam (like the kind you get in a primary fermenter for high-ABV beer that\u2019s been sitting for 2 weeks), we can adjust the software settings\u2014most 80G units let you tweak the \u201csignal filtering\u201d to ignore the top layer of foam and focus on the liquid level below. That\u2019s a setting no ultrasonic or even older radar can do as well. Third myth: \u201cYou can\u2019t use 80G on small tanks.\u201d Wait\u2014you can, as long as the tank is at least 2 feet tall (most beverage tanks are way bigger than that) and the beam doesn\u2019t hit the side walls. For small 50-gallon flavor tanks, we use the same 80G model, just mount it a little closer to the center so the beam doesn\u2019t widen enough to hit the walls. I\u2019ve got a distillery client that uses 80G on 30-gallon whiskey mash tanks, and they\u2019ve had no issues.<\/p>\n

But let\u2019s be real\u2014there are a few caveats, because nothing\u2019s perfect. The only time I\u2019ll tell a client to skip 80G is if their tank is super small, like less than 2 feet tall, or if they\u2019re dealing with a powder that\u2019s not suspended in liquid (since 80G is for liquid level, mostly\u2014though some models can do bulk solids, but that\u2019s not what we\u2019re talking about here). Also, if you have a tank that\u2019s located in a super metal-heavy area, like right next to a big conveyor belt or a radio transmitter, you might get some signal interference\u2014but that\u2019s rare, and we can add a little shielding or adjust the radar\u2019s frequency bandwidth to fix that. I had a client once that installed an 80G next to a new wireless control system, and we just tweaked a setting so the radar didn\u2019t pick up the wireless signals, and it worked fine.<\/p>\n

Now, what about installation? It\u2019s not like rocket science, but you can\u2019t just screw it into the top of the tank anywhere. You have to mount it through the top hatch or a nozzle, and make sure the beam is pointed straight down, not at the side or any internals. For tanks with agitators or dip pipes, we tell clients to mount it at least 12 inches away from any internals, so the beam doesn\u2019t hit them. Most 80G radars come with a little setup tool\u2014you plug it into your phone or laptop, run a quick calibration, and it\u2019s good to go, no fancy tools needed. I\u2019ve installed 5 of these in a day at a small craft beverage plant, with zero downtime because the setup is that simple.<\/p>\n

Wait, let\u2019s add a real example to make this concrete. Last year, I worked with a client that makes cold brew coffee and nitro cold brew. They had 8 tanks: 4 5,000-gallon fermenting tanks, 2 10,000-gallon storage tanks, and 2 500-gallon flavor tanks. Their old setup was 26G radars, and they were having constant issues: foam on the nitro tanks would make readings off, agitators would cause false signals, and CIP was wearing out the antennas. We swapped all 8 for our 80G radars. A month later, their production manager called me, super excited\u2014they cut level reading errors by 95%, stopped wasting 200+ gallons of coffee a month from overfilling batches, and the antennas haven\u2019t had to be replaced in 10 months. That\u2019s not a sales pitch, that\u2019s real feedback from a client I still talk to every quarter.<\/p>\n

So, wrapping this up: yes, 80G radar level meters absolutely can be used in beverage production tanks, and in most cases, they\u2019re the better choice over older tech like ultrasonic or even lower-frequency radar. They handle foam, CIP, pressurized tanks, and tricky tank internals way better, and the upfront cost is quickly offset by less waste, fewer downtime repairs, and more accurate batch control. The only thing you need to do is check your specific setup: your product\u2019s dielectric constant, your tank\u2019s internals, CIP requirements, and any environmental factors. If all that lines up, this is a no-brainer upgrade.<\/p>\n

<\/p>\n

If you\u2019re working on a new line, upgrading old meters, or just have questions about whether 80G will work for your beverage tanks, hit me up. I don\u2019t do pushy sales calls\u2014just help you figure out what works for your plant, no fine print, no overcomplicating things. Let\u2019s get your level readings right so you can stop wasting product and keep your production running smooth.<\/p>\n

Compact Tuning Fork Level Switch<\/a> References<\/p>\n

    \n
  1. Emerson Process Management. (2020). 80 GHz Radar Level Measurement for Food and Beverage Applications. Instrumentation Practice Series.<\/li>\n
  2. Endress+Hauser. (2021). Level Measurement in Beverage Production: Key Challenges and Solutions. Food and Beverage Industry Technical Report.<\/li>\n
  3. International Society of Automation (ISA). (2019). Radar Level Measurement Fundamentals for Process Industries. ISA-5.12-2019 Standard Supplement.<\/li>\n<\/ol>\n
    \n

    Shandong Aipuxin Automation Instrument Co., Ltd.<\/a>
    Shandong Aipuxin Automation Instrument Co., Ltd. is one of the most professional 80g radar level meter manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to wholesale cheap 80g radar level meter in stock here from our factory. For price consultation, contact us.
    Address: Huigu Phase 1, Zhongnan High-tech Canal New City, Rencheng District, Jining City, Shandong Province
    E-mail: aipuxin0124@gmail.com
    WebSite:     https:\/\/www.aipxin.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey folks, let\u2019s cut to the chase: if you\u2019re a beverage production manager or someone spec\u2019ing … Can the 80G Radar Level Meter be used in a beverage production tank?<\/span>Read more<\/a><\/p>\n","protected":false},"author":76,"featured_media":3516,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3479],"class_list":["post-3516","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-80g-radar-level-meter-406e-2364d8"],"_links":{"self":[{"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/posts\/3516","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/users\/76"}],"replies":[{"embeddable":true,"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/comments?post=3516"}],"version-history":[{"count":0,"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/posts\/3516\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/posts\/3516"}],"wp:attachment":[{"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/media?parent=3516"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/categories?post=3516"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.meovat9.com\/blog\/wp-json\/wp\/v2\/tags?post=3516"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}